Dalsa Falcon2 Series User Manual page 108

Full Name
area of interest - offset x
Mnemonic
aiy
Argument(s)
offset
GenICam
OffsetX
Release
6
Notes
The values will be rounded to the nearest increment.
Changing the aspect ratio will change the values of the AOI
Full Name
calibrate fpn correction
Mnemonic
ccf
GenICam
flatfieldCalibrationFPN
Release
6
Notes
Only available when flat field mode is set to calibration ( i.e. ffm = CAL)
May take several seconds to several minutes to complete
See Appendix D: Internal Flat Field Calibration Algorithms for more information
Full Name
camera link mode(taps)
Mnemonic
clm
Argument(s)
taps
GenICam
deviceTapCount
Release
6
Notes
The tap count must match what the framegrabber is expecting
Full Name
calibrate prnu correction
Mnemonic
cpa
Argument(s)
target
gain mode
Bad pixel threshold
GenICam
flatfieldCalibrationPRNU
flatfieldCalibrationTarget
flatfieldCalibrationGainMode
flatfieldCalibrationPixelReplacementGainThreshold
Release
6
Notes
Only available when flat field mode is set to calibration ( i.e. ffm = CAL)
May take several seconds to several minutes to complete depending on frame rate
See Appendix D: Internal Flat Field Calibration Algorithms for more information
108 •
0 to (max width – width) in increments of 128
Max height determined by model and aspect ratio
in increments of 128
8: 8 camera link taps
10: 10 camera link taps
The percentage of full scale to use as calibration target
(monochrome models only)
The gain mode used in the calibration
HG:High Gain
HR:High Resolution
The PRNU gain factor above which the pixel is marked defective.
1.50~7.99
Appendix E: Three Letter Commands