Table of Contents
Advertisement
Optional kits
Securing kits
GridRunner kit and customer-supplied cable trough
Site Planning Guide VMAX 250F, VMAX 450F, VMAX 850F, VMAX 950F with HYPERMAX OS
108
Table 33 Dispersion kit model numbers, VMAX 950F (continued)
Model
ET-DSOPTICE7U
ET-DSOPTICE8
ET-DSOPTICE8U
VMAX 250F
The Securing Kits contain heavy brackets plus hardware used to attach the brackets
to the frames of the system bay. The brackets are attached to the floor using bolts
that engage the flooring substructure provided by the customer.
The EMC VMAX Securing Kit Installation Guide provides installation instructions.
Table 34 Securing kit models, VMAX 250F
Model
ES-SECURE
ES-SECUREJK
VMAX 450F, VMAX 850F, VMAX 950F
The Securing Kits contain heavy brackets plus hardware used to attach the brackets
to the frames of the system bays. The brackets are attached to the floor using bolts
that engage the flooring substructure provided by the customer.
The EMC VMAX Securing Kit Installation Guide provides installation instructions.
Table 35 Securing kit models, VMAX 450F, VMAX 850F, VMAX 950F
Model
E-SECURE
E-SECUREADD
VMAX 250F
™
The EMC GridRunner
troughs can help organize and protect subfloor cables.
Each GridRunner supports the cable bundle above the subfloor. GridRunners are
installed with brackets that attach to the stanchions under the raised floor. The
stanchions are up to one inch in diameter, measured at six inches (15.24 cm) below
the raised tiles.
To ensure sufficient support of the cable bundle, a GridRunner should be installed
every two meters.
Description
VMAX AF ENG 7 DSP CBLOPTICS KIT UPG
VMAX AF ENG 8 DSP CBLOPTICS KIT
VMAX AF ENG 8 DSP CBLOPTICS KIT UPG
Description
Secure kit for single bay
Secure kit for joining bays
Description
Secure kit for single bay
Secure kit for joining bays
bottom routing kit (ES-BOT-KIT) and customer-supplied cable
Advertisement
Table of Contents
