RAM Commercial PROMASTER Cargo Van 2019 User Manual page 67

Front Bucket Seat Automatic Locking
Retractor (ALR) Location
ALR = Switchable Automatic Locking
Retractor
Front Bench Seat Automatic Locking
Retractor (ALR) Locations
ALR = Switchable Automatic Locking
Retractor
Installing A Child Restraint With A Switch-
able Automatic Locking Retractor (ALR)
Child restraint systems are designed to be
secured in vehicle seats by lap belts or the lap
belt portion of a lap/shoulder belt.
WARNING!
• Improper installation or failure to prop-
erly secure a child restraint can lead to
failure of the restraint. The child could
be badly injured or killed.
• Follow the child restraint manufacturer's
directions exactly when installing an in-
fant or child restraint.
1. Place the child seat in the center of the
seating position.
2. Pull enough of the seat belt webbing from
the retractor to pass it through the belt
path of the child restraint. Do not twist the
belt webbing in the belt path.
3. Slide the latch plate into the buckle until
you hear a "click."
4. Pull on the webbing to make the lap
portion tight against the child seat.
5. To lock the seat belt, pull down on the
shoulder part of the belt until you have
pulled all the seat belt webbing out of the
retractor. Then, allow the webbing to re-
tract back into the retractor. As the web-
65