Incoming Text Messages - RAM Commercial PROMASTER Cargo Van 2019 User Manual

Incoming Text Messages

After pairing your Uconnect system with a
Bluetooth enabled mobile device with the
Message Access Profile (MAP), the Uconnect
system can announce a new incoming text
message and read it to you over the vehicle's
audio system.
NOTE:
Only incoming text messages received during
the current ignition cycle can be viewed/read.
To enable incoming text messaging:
iPhone
1. Press the settings button on the mobile
phone.
2. Select Bluetooth.
• Ensure Bluetooth is enabled, and the
mobile phone is paired
Uconnect system.
3. Select located under DEVICES next to
Uconnect.
144
4. Turn "Show Notifications" to on.
Enable iPhone Incoming Text Messages
Android Devices
1. Press the Menu button on the mobile
to the
phone.
2. Select "Settings."
3. Select "Connections."
4. Turn "Show Notifications" to on.
• A pop up will appear asking you to
accept a request for permission to con-
nect to your messages. Select "Don't
ask again" and press OK.
Enable Android Device Incoming Text
Messages
NOTE:
All incoming text messages received during
the current ignition cycle will be deleted from
the Uconnect system when the ignition is
turned to the OFF position.