Starting And Stopping A Presentation - Cisco MX200 Series User Manual

43 Sharing content

Starting and stopping a presentation

Tap Present (a), then
scroll horizontally (b) to
locate the presentation
source, if needed. Once
located tap the required
source.
To stop the Presentation, tap
Stop Presenting (a).
The contact card (not shown)
may be invoked even here, as
outlined (b).
For more on the contact card
feature, see "Invoking a list of
participants and their status"
on page 37.
About sharing content
Most of the Cisco TelePresence
video systems support the ability
to show presentations in a video
call or video conference as well as
outside a call. The latter ability allows
the system to be used for local
presentations in a meeting room,
thus extending the use of the video
system and the room itself.
Note that you may change the layout
of the screen during presentations,
see the next page for more on this.
D1458217 User Guide Cisco TelePresence
Profile Series, Codec C-series, Quick Set C20
SX20 Quick Set, MX200, MX300
Produced: November 2013 for TC7.0
All contents © 2010–2013
Cisco Systems, Inc. All rights reserved.