Ringtones - Cisco MX200 Series User Manual

11 Getting up and going

Ringtones

Tap in
the upper
left corner of
the screen and then tap
Settings to invoke the
Settings menu, as outlined.
Activate (On) or deactivate (Off) the keytones
here. In this example Keytones are set to On.
Navigate to Ringtone
and Sound settings, if
needed.
Select a ring tone. You will hear the
ring tones as you tap on them.
Exit the menu by
tapping here.
Set the Ringtone
volume here.
About ringtones
You may personalize the ring tone
and its volume, if you wish. You may
also set keytones to On (a sound will
appear when tapping a "button") or
to Off.
Note that access to this menu may
have been password protected by
your video support team. If so, it
will not appear when you access
Settings.
D1458217 User Guide Cisco TelePresence
Profile Series, Codec C-series, Quick Set C20
SX20 Quick Set, MX200, MX300
Produced: November 2013 for TC7.0
All contents © 2010–2013
Cisco Systems, Inc. All rights reserved.