Layout Control In A Call - Cisco MX200 Series User Manual

36 Video conferencing

Layout control in a call

Changing the layout:
To change the existing
layout on your video screen,
tap Layout, as outlined.
Adding a self-view PiP to your layout:
Tap as outlined to include a
self-view PiP
Tap the new preferred
layout, as outlined.
The new layout will now be put
in effect.
About the layout options
You may alter the screen layout
when you are in a call. The Touch
pad will show the options available.
The actual options may differ from
what is shown here, but the Touch
pad will always show you what is
available.
The WYSIWYG (what you see is what
you get) principle applies even here.
Including a self-view
Self-view may be added to any
layout in the usual way. If needed,
you may also move it to a different
location.
See "Moving the self-view PiP" on
page 29.
D1458217 User Guide Cisco TelePresence
Profile Series, Codec C-series, Quick Set C20
SX20 Quick Set, MX200, MX300
Produced: November 2013 for TC7.0
All contents © 2010–2013
Cisco Systems, Inc. All rights reserved.