Resizing The Self-View Pip - Cisco MX200 Series User Manual

30 Point-to-point video calls

Resizing the self-view PiP

Tap Self-view, as outlined to
invoke the self-view, if needed.
Tap the self-view avatar,
as outlined.
You may now
tap Maximize to
get a full-screen
self-view.
Repeat the process to minimize,
or deactivate the self-view by
tapping the self-view icon again.
You may also use this to gain
access to controlling your own
camera.
Why resize the self-view?
The self-view shows what others
see from your video system. You will
normally use it to confirm that they
see what you want them to see.
The self-view appears as a PiP
(Picture-in-Picture).
From time to time you may want to
have the self-view activated during
the meeting.
You may want to zoom, pan or tilt
your camera to provide a better view
for the other participant(s).
D1458217 User Guide Cisco TelePresence
Profile Series, Codec C-series, Quick Set C20
SX20 Quick Set, MX200, MX300
Produced: November 2013 for TC7.0
All contents © 2010–2013
Cisco Systems, Inc. All rights reserved.