Table of Contents
Advertisement
VIPA HMI
Enable automatic log-in
HB160 | PPC | 67S-PNL0 | en | 18-18
3.
In the opening dialog window check the box 'User must enter a user name and
password to use this computer.' and confirm with [Apply]. You can also change the
password in this section under [Reset Password] at any time.
At the next start-up the user has to select the user name and enter the 'Password' .
1.
Type "cmd" under 'Start è Run'.
2.
In the next window type "control userpasswords2".
3.
In the opening dialog window uncheck the box 'User must enter a user name and
password to use this computer' and confirm with [Apply].
4.
A new dialog window opens asking you to enter the log-in data. Select here your
'User Name' and enter the corresponding 'password' . Confirm with [OK].
Operating system Windows Embedded Standard 7 > Structure
Deployment Panel PC
35
Advertisement
Table of Contents
