VIPA PPC021 ES Manual page 34

Hmi
Hide thumbs Also See for PPC021 ES:
Table of Contents

Advertisement

Deployment Panel PC
Operating system Windows Embedded Standard 7 > Structure
Control Panel
Disable automatic log-in
34
The description of the Control Panel components relevant for operating the Panel PC can
be found in the following:
n
Change display language
Per default, the PC is delivered with the display language "English". You can change
the language in 'Start è Control Panel è Clock, Language and Region
è Change display language'.
n
Ethernet parameters
The dialog field for pre-setting an Ethernet address can be found in 'Start
è Control Panel è Network and Internet è Network and Sharing Center
è Change adapter settings'. By double-click on the network the dialog window for
network properties opens. Here you can enter the Ethernet address via [Properties]
after double-click on [Internet Protocol Version ..]. The default setting is address
assignment via DHCP.
Switch function
n
If you select both Ethernet adapters under 'Start è Control Panel
è Network and Internet è Network and Sharing Center è Change adapter settings',
you can establish a network bridge via 'Bridge Connections' in the context menu. A
further Ethernet adapter called 'Network Bridge' will be displayed. Here you can
make all settings.
n
System properties
Via 'Start è Settings è System and Security è System' you receive information
about the version of the current Windows
Via 'System Protection' or 'Change settings' under 'Change' you can change the
device name that is shown during Ethernet communication for instance.
n
Allow remote access
By default, remote access to the Panel PC is disabled. For release, open the window
'Remote' via 'Start è Control Panel è System and Security è System
è Allow remote access', choose one of the release options and confirm with [OK].
By default, the Panel PC automatically logs in with the user name VIPA and the password
vipatp. If the user needs to enter name and password to use the Panel PC, the procedure
is as follow:
1.
Type "cmd" under 'Start è Run'.
2.
In the next window type "control userpasswords2".
Ò
operating system and the copyright.
HB160 | PPC | 67S-PNL0 | en | 18-18
VIPA HMI

Advertisement

Table of Contents
loading

Table of Contents