Table of Contents
Advertisement
VIPA HMI
SATA Controller(s)
Configure SATA as
Submenu "USB Configura-
tion"
HB160 | PPC | 67S-PNL0 | en | 18-18
Enables or disables SATA controller.
Configures the SATA as IDE or AHCI mode.
IDE
- This option configures the serial ATA drives as parallel ATA physical storage
device.
AHCI - This option configures the serial ATA drives to use AHCI (AdvancedHost Con-
troller Interface). AHCI allows the storage driver to enable the advanced serial
ATA features which will increase storage performance.
This section is used to configure USB devices, such as keyboard, mouse and hub.
BIOS setup
Advanced
41
Advertisement
Table of Contents
