Table of Contents
Advertisement
VIPA HMI
4.7 Save and exit
Save Changes and Exit
Discard Changes and Exit
Save Changes and Reset
Discard Changes and
Reset
Save Changes
Discard Changes
Restore Defaults
HB160 | PPC | 67S-PNL0 | en | 18-18
To save the changes and exit the setup utility, select this field then press [Enter]. A dialog
box will appear. Confirm by selecting [Yes].
You can also press [F4] to save and exit setup.
To exit the Setup utility without saving the changes, select this field then press [Enter].
You may be prompted to confirm again before exiting. The BIOS setup exits and the
POST continued.
You can also press [Esc] to exit without saving the changes.
To save the changes and reset, select this field then press [Enter]. A dialog box will
appear. Confirm by selecting [Yes]. A restart follows and the new settings become effec-
tive.
To exit the Setup utility and reboot the system without saving the changes, select this field
then press [Enter]. You may be prompted to confirm again before exiting. The BIOS setup
exits and a restart follows.
To save changes and continue configuring the BIOS, select this field then press [Enter]. A
dialog box will appear. Confirm by selecting [Yes].
To discard the changes, select this field then press [Enter]. A dialog box will appear. Con-
firm by selecting [Yes] to discard all changes made and restore the previously saved set-
tings.
To restore the BIOS to default settings, select this field then press [Enter]. A dialog box
will appear. Confirm by selecting [Yes].
BIOS setup
Save and exit
49
Advertisement
Table of Contents
