Table of Contents
Advertisement
VIPA HMI
IGFX-Boot Type
Backlight Control Select
Backlight On/Off Reverse
Backlight Dimming Con-
trol Select
HB160 | PPC | 67S-PNL0 | en | 18-18
This field is used to configure which video device will be activated during POST. This has
no effect if external graphics present. The options are CRT, LVDS, DP-LVDS + CRT.
The available options are 'Pyroelectric sensor' and 'Tact Switch' . The default setting is
'Tact Switch' .
Please configure this option only when changing the panel, otherwise the display may not
work.
The options are 'Tact Switch' , 'Manual' and 'Light Sensor' . The default setting is
'Manual' and the Backlight option below will be configurable.
BIOS setup
Chipset
45
Advertisement
Table of Contents
