Table of Contents
Advertisement
VIPA HMI
Serial Port
Change Settings
Onboard Serial Port 1
Mode
Terminal resistor
H/W Monitor
HB160 | PPC | 67S-PNL0 | en | 18-18
Enables or disables the serial port.
Disabled - Serial port is not available
Enabled - (default) Serial port is available
Selects an optimal setting for the super IO device.
This field is used to configure the mode of serial port 1 as RS232, RS422 (default),
RS485 or RS485 AUTO.
Enables or disables the terminal resistor for RS422 and RS485.
Disabled - Terminal resistor not activated
Enabled - (default) Terminal resistor activated
This section 'PC Health Status' is used to configure the hardware temperature and vol-
tages.
BIOS setup
Advanced
43
Advertisement
Table of Contents
