Memory Management - VIPA PPC021 ES Manual

Hmi
Hide thumbs Also See for PPC021 ES:
Table of Contents

Advertisement

Hardware description
Structure > Memory management
VGA interface
Line out
"Host"-USB-A
Ethernet connection
Power supply

2.3.3 Memory management

Overview
Work memory
User memory
USB storage media
Slot for CFast
14
VGA SubD HD15 jack to connect a second display.
3.5 mm stereo jack to connect an active speaker system or an earphone.
Using the "Host"-USB-A interface USB mouse, keyboard, stick or USB hard discs can be
connected.
The two RJ45 jacks provide the interface to the twisted pair cable, required for Ethernet.
LEDs
Activity
Link
yellow
green
blinks
blinks
blinks
The Panel PC has got an integrated power supply. The power supply has to be provided
with DC 12... 30V. For this you find an according DC 24V slot at the back. The power
supply is protected against inverse polarity and overcurrent.
n
2GB work memory
n
16GB SSD user memory
n
USB storage media using "Host"-USB-A interface
n
Slot for CFast memory card
The Panel PC has a work memory with a size of 2GB. The work memory is not buffered
and is deleted after shut down.
As internal permanent storage medium the Panel PC has a 16GB flash module (7GB
user data).
The Panel PC has got four USB 2.0 interfaces. The connection of USB sticks and USB
drives are supported by the Panel PC.
At the back of the Panel PC there is a card slot for a memory card. At this slot you can
plug storage modules of the type CFast 2.0 - 600 MB/s (6GBit/s) - SATA protocol - not
hot-swap compatible.
Link
Description
orange
1000Mbit/s link
100Mbit/s link
10Mbit/s link or no link
not active
HB160 | PPC | 67S-PNL0 | en | 18-18
VIPA HMI

Advertisement

Table of Contents
loading

Table of Contents