Commissioning; Firmware Update - VIPA PPC021 ES Manual

Hmi

Hide thumbs Also See for PPC021 ES:

Table of Contents

Deployment Panel PC

Commissioning > Firmware update

3.3 Commissioning

Firmware update without

Startup Manager

Firmware update with

Startup Manager

CAUTION!

–

Before commissioning the device must be brought to room tempera-

ture.

–

At condensation the device must be absolutely dry before connected

to power.

–

To avoid overheat during operation the device must not be laid open

to direct sun light.

–

After opening the control cabinet or desk, there are parts with pos-

sible dangerous voltage available.

–

For all signal connections only screened cables are permitted.

–

Signal cables must not be let within the same cable shaft as high

voltage cables.

To execute the firmware update an external keyboard and an USB stick (memory size

4GB) is necessary. The new image file for your Panel PC should be on the USB stick.

You will find the file and a detailed description of the firmware update on www.vipa.com

under "Service / Support" in the download area.

In the "VIPA Startup Manager", run the Firmware update of your Panel PCs via the [Info/

Ä 'Info/Update (firmware)' on page 27

Update] button.

HB160 | PPC | 67S-PNL0 | en | 18-18

VIPA HMI

Table of Contents