Table of Contents
Advertisement
MAC ADDRESS
Each DN-V1700 is assigned own MAC address for network connection. The MAC address is described at the sticker on the
printing circuit board. (MAIN UNIT GU-3420A)
If the MAIN UNIT (GU-3420A) or FLASH ROM (IC110) is replaced to another one, reset the same MAC address and confirm it.
If the MAIN UNIT (GU-3420A) is replaced to another one and MAC address is reset, put the sticker described MAC address on
the same place of the MAIN UNIT.
Setting and confirmation of MAC address are enable by sending serial command from PC. The operation requires RS-232C
connection between the PC and DN-V1700.
Serial command "MA" is applied for the MAC address setting.
MAC address setting
<Format> "MACaddress" MA<CR><LF>
(MACaddress = hexadecimal numbers [0, . . ,9, a, . . . ,f ] of 12 digits)
<Reply>
R<CR><LF>
<Details> Sets the DN-V1700's MAC address. The new setting is reflected after the system is rebooted. This command is
only accepted in the stop mode. It is not accepted when a clip is playing. The contents of a setting of this
command become effective after a reboot.
Serial command "3?E" is applied for the MAC address setting.
Confirmation of MAC address
<Format> 3?E<CR><LF>
<Reply>
MAC: 0005cd******<CR><LF>
R<CR><LF>
<Details> Reply the own MAC adddress.
DN-V1700
6
Advertisement
Table of Contents
