OmniPod DASH SYSTEM PODDER Resource Manual page 19

Table of Contents

Advertisement

3. Press Start
3.1
+
Tap "START"
3.2
WARNING:
+ The Personal Diabetes Manager will generate an automatic reminder to check your blood glucose 1.5 hours after each Pod change. If the cannula is not properly inserted,
hyperglycemia may result. Verify there is no wetness or scent of insulin, which may indicate the cannula has dislodged.
+ NEVER inject insulin (or anything else) into the fill port while the Pod is on your body. Doing so may result in unintended or interrupted insulin delivery.
+Verify cannula does not extend beyond adhesive backing once needle cap is removed.
If the Personal Diabetes Manager screen times out during the process, press the Power button to continue.
+
Verify that the
3.3
+
Pod is securely
attached to
your body,
then tap
"CONFIRM"
+
For best
technique refer
to pinching
up in the Pod
Placement/
Prep/Tips
section of
this Resource
Guide
OMNIPOD DASH
SYSTEM INSTRUCTIONS |
The Pod
3.4
+
automatically
inserts the
cannula and
delivers a prime
bolus to fill the
cannula with
insulin
Activate a New Pod
Once the
3.5
+
Your Pod is
cannula has
now active!
inserted, verify
+
The PDM will
proper insertion
generate an
by checking
automatic
that the pink
reminder to
slide insert is
check your
visible in the
blood glucose
faint window
1.5 hours
on the top of
after each
the Pod
Pod change

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DASH SYSTEM PODDER and is the answer not in the manual?

Questions and answers

Table of Contents