OmniPod DASH SYSTEM PODDER Resource Manual page 18

OMNIPOD DASH
2. Apply the Pod (continued)
2.2 + For optimal adhesion,
always clean the
site thoroughly with
an alcohol swab to
remove all body oils
and lotions, which
may loosen the Pod's
adhesive. Let the site
air-dry completely; do
not blow on the site to
dry it
18
/
If the Personal Diabetes Manager screen times out during the process, press the Power button to continue.
19
SYSTEM INSTRUCTIONS |
™
2.3 + Remove Pod's blue
needle cap
Activate a New Pod
2.4 + Carefully remove white
paper backing from
the adhesive, ensuring
the adhesive is clean
and intact
2.5 + Apply the Pod to the
selected site
+ Run your finger
around the adhesive
to secure it