3-System - ProJet Hornet-III Instruction Manual

2.3 ADJUSTMENT TEMPERATURE
Adjustment of the temperature element
2.4 FUEL CONSUMPTION
To use the fuel gage the characteristic pump curve is necessary. Set in the fuel-flow at 1 Volt (FUEL-FLOW
@1.0V) and 2 Volt (FUEL-FLOW @2.0V) pump voltage. For calculating the remaining fuel set in the size of
the fuel tank.

3-SYSTEM

3.1 BATTERY VOLTAGE
Set in the min. and max. voltage of battery.
3.2 LANGUAGE
Choose your language .
3.3 COUNTER
Shows the effective running time of engine
3.4 FAILSAFE FUNKTIONS
Necessary if receiver fail safe or error impulses arises (see chapter distance control)
3.5 SWITCH CHANNEL FUNCTIONS
If a switch channel is used, the functions must be filled in. Choosing possibilities :
Without function
ON/OFF Switch
SMOKER VALVE
off not before egt exceeds 300°C
Notice, the channel has to be teached in before using.
3.6 WIRELESS TELEMETRIE
Activating a telemetry transmitter (TRX-2400). The count of data is specified (OFF/1x/2x/3x) and channel
(COM-CHANNEL 0-10) and the address of telemetry-Terminal (0-10000). More detailed information see
on telemetry-system instructions manual.
3.10 SETTING RES ET
ATTENTION! Choice sets the ecu in condition of delivery date!
9-EXPERTE MASTERMODE
The menu 9 can only be used in a self-build version, in a producer version this menu is not available.
ATTENTION ! Setting of all necessery parametres for the runnig behaviours of engine. Settings must be
carried out by an expert!
9.1 MAXIMUM UPM INPUT
Max. adjustable speed (MENU 1.1)
9.2 MINIMUM UPM INPUT
Min. adjustable speed (MENU 1.2)
: Switch channel is not used
: Switch channel replaces trimming
: A Smoker valve can be used. Notice, that the output will switched
17