ProJet Hornet-III Instruction Manual page 13

STATUSDISPLAY 2 - KEROSENE
Status display 2 informs about kerosene consumption and remaining fuel.
STATUSDISPLAY 3 - POWERSUPPLY
Status display 3 informs about battery state.
STATUSDISPLAY 4 – ERROR MESSAGES
Status display 4 show last turn off reason.
ERROR MESSAGES START-PHASE:
RPM < 2.000 DURING HEAT
REASON: Engine felt short of 2000rpm during heating time
EXPLANATION: Starter voltage to low(Menu 9.16), Starter broken, Stucking engine
RPM < 5.000 DURING INCREASING
REASON: Engine could not reach 5000 rpm during ramp-up to idle rpm
EXPLANATION: Starter voltage to low(Menu 9.16), Starter broken, Stucking engine
FLAMEOUT DURING HEAT
REASON: Temperature felt of short 200 degree during heating time
EXPLANATION: Starter voltage to high (Menu 9.16), Fuel intervals (Menu 1.8) to low
FLAMEOUT DURING INCREASING
REASON: Temperature felt of short 200 degree during ramp-up.
EXPLANATION: Starter acceleration to high (Menu9.19), Fuel supply interrupted
13