ProJet Hornet-III Instruction Manual page 11

STATE MESSAGES
OFF
engine off, standby
STANDBY
standby – waiting for start sequence (throttle stick to 0% and next to 100%)
PROP IGNIT
Start engine– propane ignition
BURNER ON
Kerosene ignition– Burner plug on
FUELIGNIT
Kerosene ignition
FUELHEAT
Heat – Engine will be heated with constant rmp and pump voltage
RAMP DELAY
Starter will accelerate slowly without increasing pump voltage
RAMP UP
Increase engine to idle rpm
WAIT ACC
Waiting for acceleration gets steady
STEADY
Waiting for stabilize rpm
CAL IDLE
Teach in idle rpm
CALIBRATE
Teach in calibration rpm
GO IDLE
Stabilize idle rpm
AUTO
Engine in automatically operation
AUTO-HC
Engine in automatically operation – max. rpm is teached in – Necessary for carry out emergency programs
11