ViewZ VZ-IP-PVM-N Series User Manual page 91

CONFIG. / NETWORK SERVICE
3. Setup PPPoE Parameters
Procedure
Table 9-2 PPPoE parameters
Parameter
PPPoE Indicates whether to enable the PPPoE service.
Account PPPoE user name provided by the network carrier.
Password Password provided by the network carrier.
IP Address The parameter is automatically filled by network.
Step 3 Click Apply.
• The message "Apply success!" is displayed. Click Confirm. The system saves the settings.
• If other information is displayed, set the parameters correctly.
User Manual
DESCRIPTION
Visit the ViewZ USA website at https://www.viewzusa.com
Setting
[Setting method]
Click the button ON.
[Default Value] OFF
[Setting method]
Enter a value manually.
[Default Value] Blank
[Setting method]
Enter a value manually.
[Default Value] Blank
91