Service Information - Ferroli OMNIA H Series Installation, Maintenance And User Manual

Service information

About service information
Service information menu contents as following:
1) SERVICE CALL: to check service call for contacting;
2) ERROR CODE: to check the error code mean;
3) PARAMETER: to review the operation parameters;
4) DISPLAY: to set the display.
■ Go to ''MENU'' > ''SERVICE INFORMATION''. Press ''OK''
SERVCE CALL
The following page will appear:
■ The service call can show the service phone or mobile
nember. The installer can input the phone number. See FOR
SERVICEMAN,
SERVICE INFORMATION
SERVICE ERROR
CALL CODE
PHONE NO. 0000000000000
MOBILE NO. 0000000000000
SCROLL
ERRORE CODE
Error code is used to show when the fault or protection hap-
pen and show the mean of the error code.
SERVICE INFORMATION
SERVICE ERROR
CALL CODE
E2
E2
E2
E2
ENTER SCROLL
OK
Press OK the page will appear:
SERVICE INFORMATION
SERVICE ERROR
CALL CODE
E2
E2
E2
E2
ENTER SCROLL
OK
62
CONTROL SYSTEM
PARAMETER DISPLAY
PARAMETER DISPLAY
14:10 01-08-2015
14:00 01-08-2015
13:50 01-08-2015
13:20 01-08-2015
PARAMETER DISPLAY
14:10 01-08-2015
14:00 01-08-2015
13:50 01-08-2015
13:20 01-08-2015
Press OK to show the mean of the error code:
12:30 08-08-2015 SAT.
E2 comunication fault between
controller and indoor unit
Please contact your dealer.
CONFIRM
OK
PARAMETER
The parameter function is used to display the main working
parameters.
SERVICE INFORMATION
SERVICE ERROR
CALL CODE
ROOM SET TEMP.
MAIN SET TEMP.
TANK SET TEMP.
ROOM ACTUAL TEMP.
ENTER
OK
DISPLAY
The display function is used to set the interface, the main
items is language, backlight, buzzer and screen lock time:
SERVICE INFORMATION
SERVICE ERROR
CALL CODE
LANGUAGE
BACKLIGHT
BUZZER
SCREEN LOCK TIME
ENTER
OK
Use ''OK'' to enter and use ''◄'',''►'',''▼'',''▲'' to scroll.
Information: IT (Italian), EN (english), ecc
PARAMETER DISPLAY
26ºC
55ºC
55ºC
24ºC
SCROLL
PARAMETER DISPLAY
EN
ON
ON
120SEC
SCROLL