Installation; Inspections On Arrival; Packing And Storing - Ferroli OMNIA H Series Installation, Maintenance And User Manual

Inspections on arrival

Al momento del ricevimento dell'unità è indispensabile controllare di aver ricevuto tutto il materiale indicato sul documento d'accom-
pagnamento, ed inoltre che la stessa non abbia subito danni durante il trasporto. In caso affermativo, far costatare allo spedizioniere
l'entità del danno subito, avvertendo nel frattempo il nostro uffi cio gestione clienti. Soltanto agendo in questo modo e tempestiva-
mente sarà possibile avere il materiale mancante o il risarcimento dei danni.

Packing and storing

All machines are packed in cardboard boxes specific for each unit.
The indications required to correctly handle the appliance while storing and installing it are written
on the packing.
The storage temperature must be between -25°C and 55°C.
NOTA: Do not dispose of the packaging in the environment.
☞
Do not dispose of, leave or leave within the reach of children the packaging material as it
may be a potential source of danger.
Once the place in which the unit is to be installed has been chosen (see the relative sections)
proceed as follows to unpack the two units.
Selecting the installation site and minimum operating area indoor unit
The place of installation must be free of powders, fl ammable objects or mate-
rials or corrosive gases.
The unit is designed for wall hanging installation and is equipped as standard
with a hooking bracket. The fi xing to the wall must guarantee a stable and
effective support.
For the dismantling of the paneling and for normal maintenance
☞
activities the minimum operating spaces must be respected.
Select an installation location where the following conditions are met:
- Place that allows to respect the maximum lengths allowed for pipes, connec-
tions to the unit of temperature probes, remote control etc ..
- Do not place objects or equipment on top of the unit.
- Make sure that all the precautions and prescriptions foreseen by local laws
and regulations regarding possible refrigerant leaks are correctly applied.
- It is advisable to place the boiler for domestic hot water production as close
as possible to the indoor unit.

INSTALLATION

fi g. 1
fi g. 2
fi g. 3
11