Child Lock; Service Information (Change Language); Servce Call; Error Code - Ferroli OMNIA HYBRID C Installation, Maintenance And User Manual

7.13 Child lock

The CHILD LOCK function is used to prevent children error operation. The mode
setting and temperature adjusting can be locked or unlocked by use CHILD LOCK
function (password=123). Go to "MENU'' > ''CHILD LOCK''. The page is displayed:
CHILD LOCK
Please input the password:
ENTER
OK
Input the corrent password,the following page will appear:
CHILD LOCK
COOL/HEAT TEMP. ADJUST
COOL/HEAT MODE ON/OFF
DHW TEMP. ADJUST
DHW MODE ON/OFF
UNLOCK
UNLOCK
Use ''▼'',''▲'' to scroll and ''UNLOCK'' to select LOCK or UNLOCK. The tem-
perature can't be adjusted when the temperature is locked.The mode can't be
changed when the mode is locked. If you want to change them, you must unlock
them use the CHILD LOCK function.

7.14 Service information (change language)

About service information
Service information menu contents as following:
1) service call: to check service call for contacting;
2) error code: to check the error code mean;
3) parameter: to review the operation parameters;
4) set the display language and configuration.
■ Go to ''MENU'' > ''SERVICE INFORMATION''. Press ''OK''

SERVCE CALL

The following page will appear:
■ The service call can show the service phone or mobile nember. The installer can
input the phone number. See "8.12 Service call".
SERVICE INFORMATION
SERVICE ERROR
CALL CODE
PHONE NO. 0000000000000
MOBILE NO. 0000000000000
SCROLL
SERVICE INFORMATION
SERVICE ERROR
46
EN
CALL CODE
REMOTE CONTROLLER - USER MENU
0 0 0
ADJUST SCROLL
fig. 88 -
UNLOCK
UNLOCK
UNLOCK
UNLOCK
SCROLL
fig. 89 -

PARAMETER

DISPLAY
fig. 90 -
PARAMETER DISPLAY
Cod. 3541T090 - Rev. 00 - 06/2019
MOBILE NO. 0000000000000
SCROLL

ERROR CODE

Error code is used to show when the fault or protection happen and show the
mean of the error code.
SERVICE INFORMATION
SERVICE ERROR
CALL CODE
E2
E2
E2
E2
ENTER
OK
Press OK the page will appear:
SERVICE INFORMATION
SERVICE INFORMATION
SERVICE ERROR
SERVICE ERROR
CALL CODE
CALL CODE
E2
E2
E2
E2
E2
E2
E2
E2
ENTER
OK
ENTER
OK
Press OK to show the mean of the error code:
12:30 08-08-2015 SAT.
12:30 08-08-2015 SAT.
E2 comunication fault between
E2 comunication fault between
controller and indoor unit
controller and indoor unit
Please contact your dealer.
Please contact your dealer.
CONFIRM
OK CONFIRM
OK
PARAMETER
The parameter function is used to display the main working parameters:
SERVICE INFORMATION
SERVICE ERROR
CALL CODE
ROOM SET TEMP.
MAIN SET TEMP.
TANK SET TEMP.
ROOM ACTUAL TEMP.
ENTER
OK
PARAMETER DISPLAY
14:10 01-08-2015
14:00 01-08-2015
13:50 01-08-2015
13:20 01-08-2015
SCROLL
fig. 91 -
PARAMETER DISPLAY
PARAMETER DISPLAY
14:10 01-08-2015
14:10 01-08-2015
14:00 01-08-2015
14:00 01-08-2015
13:50 01-08-2015
13:50 01-08-2015
13:20 01-08-2015
13:20 01-08-2015
SCROLL
SCROLL
fig. 92 -
fig. 93 -
PARAMETER DISPLAY
26ºC
55ºC
55ºC
24ºC
SCROLL
fig. 94 -