Tait TM8260 Installation And Programming Manual page 35

Installing a Hand-Held Control Head
Figure 3.11
bodies and a hand-held control head.
Figure 3.11
To radio
body with
link J4 fitted
1.
2.
3.
TM8260 Installation and Programming Guide
© Tait Limited October 2014
contains an overview of the connection between the radio
Connecting radio bodies to hand-held control head
Body with link J4 removed
Outermost Innermost
port port
Hand-held control head curly cord
(may include extension TMAA04-14 to -17)
If a radio body does not have link J4 removed, or you cannot identify the
correct radio body to use, you will need to disassemble one or both inter-
faces. See "Removing the Body Interface" on page 22
mation.
Attach the hand-held control head cord to the innermost port of the
radio body with link J4 removed.
The outermost port of this radio body connects to the other radio body.
Install the cable grommet. See
on page 15.
Install the control head mounting clip in the most convenient
location for the radio user.
for more infor-
"Removing and Installing Grommets"
Installing a Dual-Radio System
Hand-held
control head
35