Tait TM8260 Installation And Programming Manual page 34

Figure 3.10
Installing the
Remote Cable
bodies and the control head.
Figure 3.10
to radio
body with
link J4 fitted
1.
2.
3.
34 Installing a Dual-Radio System
contains an overview of the connection between the radio
Connecting radio bodies to control head with graphical-display
body with link J4 removed
outermost
innermost
port port
control head remote
cable TMAA04-01
(6m/19.6ft.)
If a radio body does not have link J4 removed, or you cannot identify the
correct radio body to use, you will need to disassemble one or both inter-
faces. See "Removing the Body Interface" on page 22
mation.
Attach one end of the control-head remote cable to the innermost
port of the radio body with link J4 removed.
The outermost port of this radio body connects to the other radio body.
Attach the other end of the control-head remote cable to the rear port
of the control head remote interface.
Install the cable grommets. See
Grommets" on page
control head
"Removing and Installing
15.
TM8260 Installation and Programming Guide
CH port
for more infor-
© Tait Limited October 2014