Tait TM8260 Installation And Programming Manual page 20

Figure 3.4
control head loom
b Graphical control-head
(before interfaces are installed)
9.
10.
11.
20 Installing a Dual-Radio System
VHF radio body connected directly to the control head
to power
supply
VHF radio UHF radio
control head
to PC
Click Radio > Download Configuration again, and download the
same table to device TMABxx with the lower address.
Click Radio > Download Configuration a third time, and
download the same table to the control head (device TMACxx).
If installing a second control head using the upgrade kit TMAA11-09,
connect the second control head to a radio body and repeat step 10 for
device TMACxx with the higher NTID.
Check that all red indicators in the table are now green.
VHF radio UHF radio
body remote interfaces
remote cable
control head
remote interface
control head
to PC
c Graphical control-head
(after interfaces are installed)
VHF radio
body remote interfaces
control-head
curly cord
d Hand-held control head
(requires body remote interfaces)
TM8260 Installation and Programming Guide
© Tait Limited October 2014
UHF radio
to PC