1. Manuals
  2. Brands
  3. Hallde Manuals
  4. Kitchen Appliances
  5. RG-100
  6. User instructions

Hallde RG-100 User Instructions

Vegetable preparation machine
Hide thumbs Also See for RG-100:
1
2
3
4
5
6
7

Advertisement

Table of Contents

User instrUctions

vegetable preparation machine rg-200
made in sweden. exclusively distributed and serviced in australa by roband australia pty ltd.
all standard hällde products are designed to run at 220-240v per phase, 50hz.
all specifications are nominal only. all information contained in this instruction is subject to change without notice
due to constant research and development. ab hällde maskiner reserves the right to make changes to machines,
accessories and cutting tools.
Roband Australia Pty Ltd
all care has been taken to ensure correct information at time of printing. ab hällde maskiner
1 inman road,
accepts no responsibility for printing errors.
cromer, nsW 2099
australia
tel: +61 2 9971 1788
Fax: +61 2 9971 1336
www.roband.com.au
robandaustralia
0319
email: sales@roband.com.au

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RG-100 and is the answer not in the manual?

Questions and answers

Related Manuals for Hallde RG-100

Summary of Contents for Hallde RG-100

  • Page 1: User Instructions

    User instrUctions vegetable preparation machine rg-200 made in sweden. exclusively distributed and serviced in australa by roband australia pty ltd. all standard hällde products are designed to run at 220-240v per phase, 50hz. all specifications are nominal only. all information contained in this instruction is subject to change without notice due to constant research and development.

  • Page 2: Installation

    Check that the machine cannot be started with to avoid oxidation and discoloration of the rotate the cutting tool so that it drops firmly the feed cylinder removed and with the pusher surface. into its position. plate lowered. HALLDE • User Instructions...

  • Page 3: Technical Specification

    REMEDY: Use the wrench to unscrew the decoring device clockwise. TECHNICAL SPECIFICATION HALLDE RG - 200 MACHINE: Motor: 0.25 kW, 230 V, single- phase, 50 Hz, with thermal motor protection. Transmission: gears. Safety system: Two safety switches. Degree of protection: IP44.

  • Page 4: Using The Feeder

    PARTS / ASSEMBLING ASSEMBLING CUTTING TOOL USING THE FEEDER ANGLE CUT FEED HEAD FEEDER DECORING DEVICE LETTUCE * CUTTING TOOL POTATOES ALWAYS USE! PESTLE EJECTOR PLATE TOMATOES MACHINE BASE HALLDE • User Instructions...
  • Page 5 The QR-code above leeds you to our Cutting in good condition. accordance with the list on page 42-45. Tool Guide at hallde.com. The guide shows DURING USE: which cutting tool is recommended to use TECHNICAL SPECIFICATION...

  • Page 6: Fitting The Cutting Tools

    CC - 32S, RG - 50S, CC - 34 , RG - 50 AND RG - 100 CC - 34, RG - 50 AND RG - 100 Cutting tool Cutting tool from RG-100 Ejector plate Dicing grid KNIFE HOUSE Ejector plate...
  • Page 7 Vegetable Preparation Machine RG-100 and RG-200 Vegetable Preparation Machine RG-250 HALLDE • User Instructions...

This manual is also suitable for:

Rg-200Rg-250

Table of Contents