Other Control Commands; Receiver Status; Receiver Status Auto Report; Product Version - AOR AR2300 Operating Manual

13. Other control commands

13-1 Receiver status

13-1-1 Receiver status
RX
Response:
In VFO mode:
VX RFnnnn.nnnnnn STnnn.nnn(+) AUn MDnn ATnm ANnn
In Memory receive mode:
MXnnmm GAn MPn RFnnnn.nnnnnn STnnn.nnn(+) AUn MDnn ATnm ANnn TMxxxxxxxxxxxx
In Memory scan mode:
MS MXnnmm GAn MPn RFnnnn.nnnnnn STnnn.nnn(+) AUn MDnn ATnm ANnn
TMxxxxxxxxxxxx
In Select scan mode:
SM MXnnmm GAn MPn RFnnnn.nnnnnn STnnn.nnn(+) AUn MDnn ATnm ANnn
TMxxxxxxxxxxxx
In Normal search mode:
SRnn RFnnnn.nnnnnn STnnn.nnn(+) AUn MDnn ATnm ANnn TMxxxxxxxxxxxx
In FFT search mode:
FFnn FSnn FT-nnn
(Note: The (+) sign for the ST command will appear when the step adjust function is
activated.)

13-1-2 Receiver status auto report

RT
To read: RT<CR>
Response: RTnnnn

13-2 Product version

VR
To read: VR<CR>
Response:
VRF
To read: VRF<CR>
Response:
49
RX<CR>
RTnnnn
VR (Direct command)
Cxxxxxxxxxxxx Dxxxxxxxxxxxx
C: Main board
VRF (Direct command)
F:xxxxxxxxxxxx D:xxxxxxxxxxxx
F: FPGA version D:DSP version
n: 0, 1~ 6000 (in 10 mS)
0: Disabled
D: Decoder board