Hyundai H-100 Owner's Manual page 164

WINDSHIELD WIPER
BLADES
G080A02A-AAT
G080A01HR
The wiper blades should be carefully
inspected from time to time and cleaned
to remove accumulations of road film or
other debris. To clean the wiper blades
and arms, use a clean sponge or cloth
with a mild soap or detergent and water.
If the wipers continue to streak or smear
the glass, replace them with Genuine
Hyundai Replacement parts or their
equivalent.
!
CAUTION:
o Do not operate the wipers on dry
glass. This can result in more
rapid wear of the wiper blades and
may scratch the glass.
o Keep the blade rubber out of con-
tact with petroleum products such
as engine oil, gasoline, etc.
DO-IT-YOURSELF MAINTENANCE
G080B01HR-GAT
Replacing the Wiper Blades
To replace the wiper blades, raise the
wiper to the vertical.
To remove the wiper blade
(1)
HHR5048
1. Push down the wiper blade with the
locking clip (1) pressed to detach it
from the wiper arm.
6
13