Hyundai H-100 Owner's Manual page 92

1
FEATURES OF YOUR HYUNDAI
80
o Press the station select button for
more than two seconds. A select
button indicator will show in the dis-
play indicating which select button
you have depressed. The frequency
display will flash after it has been
stored into the memory with beep
sound. You should then release the
button, and proceed to program the
next desired station. A total of 18
stations can be programmed by se-
lecting one AM and two FM stations
per button.
o When completed, any preset station
may be recalled by selecting AM,
FM1 or FM2 band and the appropri-
ate station button.
7. SCAN Button
When the scan button is pressed, the
frequency will be increased and the
receivable stations will be tuned in one
after another, receiving each station for
5 seconds. To stop scanning, press the
scan button again.
8. BASS Control Knob
Press to pop the knob out and turn to
the left or right for the desired bass
tone.
BAL (Balance) Control Knob
Pull the bass control knob further out.
Turn the control knob clockwise to
emphasize right speaker sound (left
speaker sound will be attenuated).
When the control knob is turned coun-
terclockwise, left speaker sound will be
emphasized (right speaker sound will
be attenuated).
!
CAUTION:
o Do not place beverages close to
the audio system. The playback
mechanism may be damaged if
you spill them.
o Do not impact on the audio sys-
tem, or the playback mechanism
could be damaged.