Direct-To-Navigation (Pfd) - Garmin G1000 Pilot's Manual

5.4 DIRECT-TO-NAVIGATION (PFD)

Section 5.2 describes the PFD Inset Map and PFD Windows. It is recommended that the user read this
NOTE:
section before beginning GPS navigation operations on the PFD.
Bearing From Waypoint
Distance to
Direct-to
Waypoint
Course to Selected Waypoint
Enter a Direct-to Destination
1) Press the Direct-to Key.
2) Place the cursor in the desired selection field.
3) Begin selecting the desired identifier, location, etc.
4) Press the ENT Key. The cursor is now flashing on 'ACTIVATE?'.
5) Press the ENT Key to activate.
6) Press the ENT Key to highlight 'Activate?' or turn the large FMS Knob to highlight the 'COURSE' field.
7) Enter the desired course to the waypoint.
8) Press the ENT Key to highlight 'ACTIVATE?'.
9) Press the ENT again to activate the Direct-to.
190-00592-02 Rev. A
Waypoint Symbol
Identifier
Facility Name
Flight Plan
Waypoint List
Garmin G1000 Pilot's Guide for the Diamond DA40/40F
Figure 5-27 PFD Direct-to Window
GPS NAVIGATION
City, State
Nearest
Waypoint List
Lat/Lon of Direct-to
Waypoint
Activate
Annunciation
5-33