Garmin G1000 Pilot's Manual page 229

5) Pr ess the ENT Key until the departure field is highlighted .
6) Select the desired departure.
7) Pr ess the ENT Key. A window appears listing the available transitions for the departure.
8) Select the desired transition or vectors.
9) Pr ess the ENT Key. A window appears listing the available runways for the departure.
10) Select the desired runway.
11) Wi th 'LOAD?' highlighted, press the ENT Key to load the departure.
SELECT ARRIVAL
'SELECT ARRIVAL' selects a published standard terminal arrival route (STAR) for the destination airport or
replaces a current arrival with a new selection.
Available
Arrivals
Selecting an arrival for a direct-to or flight plan destination airport:
1) Display the Procedures Window by pressing the PROC Key.
2) Highlight 'SELECT ARRIVAL'.
3) Pr ess the ENT Key.
4) Enter an identifier, city, or facility name.
5) Pr ess the ENT Key until the arrival field is highlighted .
6) Select the desired arrival.
7) Pr ess the ENT Key. A window appears listing the available transitions for the arrival.
8) Select the desired transition or vectors.
9) Pr ess the ENT Key. A window appears listing the available runways for the arrival.
10) Select the desired runway.
11) Wi th 'LOAD?' highlighted, press the ENT Key to load the arrival.
190-00592-02 Rev. A
Figure 5-99 Selecting an Arrival
Garmin G1000 Pilot's Guide for the Diamond DA40/40F
GPS NAVIGATION
Available
Transitions
5-107