Garmin G1000 Pilot's Manual page 220

GPS NAVIGATION
Act ivating a departure leg:
1) Press the FPL key.
2) Press the FMS knob to activate the cursor.
3) Turn the large FMS knob to highlight the desired waypoint within the departure.
4) Press the ACT LEG softkey. A confirmation window showing the selected leg will be displayed.
5) With 'ACTIVATE' highlighted, press the ENT key.
Viewing a Departure Airport:
1) Select the Departure Information Page.
2) Press the MENU Key.
3) Highlight 'View Departure Airport'.
4) Press the ENT Key. The Departure Airport Page is displayed.
OR :
1) Select the Approach Information Page.
2) Press the MENU Key.
3) Highlight 'View Departure Airport'.
4) Press the ENT Key. The Departure Information Page is displayed.
OR :
1) Select the Arrival Information Page.
2) Press the MENU Key.
3) Highlight 'View Departure Airport'.
4) Press the ENT Key. The Departure Information Page is displayed.
5) Enter an identifier, facility, or city name for the departure airport.
Removing a departure:
1) From the Active Flight Plan Window, press the MENU Key.
2) Select the 'Remove Departure' option.
3) Press the ENT Key. A confirmation window is displayed listing the procedure.
4) With 'OK' highlighted, press the ENT Key. To cancel the removal request, highlight 'CANCEL' and press the ENT
Key.
5-98
Figure 5-93 Activate Leg Option
Garmin G1000 Pilot's Guide for the Diamond DA40/40F 190-00592-02 Rev. A