Garmin G1000 Pilot's Manual page 48

SYSTEM OVERVIEW
T S
RIP TATISTICS
The odometer and trip odometer record the total mileage traveled from the last reset; these odometers can
be reset independently. Resetting the trip odometer also resets the average trip groundspeed. Maximum
groundspeed for the period of time since the last reset is also displayed.
Resetting trip statistics readouts:
1) Use the FMS Knob to select the AUX - Utility Page.
2) Press the MENU Key. The following reset options for trip statistics are displayed:
• Reset Trip ODOM/AVG GS—Resets trip average ground speed readout and odometer
• Reset Odometer—Resets odometer readout only
• Reset Maximum Speed—Resets maximum speed readout only
• Reset All—Resets flight timer, departure timer, odometers, and groundspeed readouts
2) Use the FMS Knob to highlight the desired reset option and pr ess the ENT Key. The selected parameters are reset
to zero and begin to display data from the point of reset.
S
CHEDULER
The scheduler feature can be used to enter and display reminder messages (e.g., "Change oil", "Switch
fuel tanks", "Overhaul"). Messages can be set to display based on a specific date and time (event), once the
message timer reaches zero (one-time; default setting), or recurrently whenever the message timer reaches
zero (periodic). Message timers set to periodic alerting automatically reset to the original timer value once
the message is displayed. When power is cycled, messages are retained until deleted, and message timer
countdown is restarted.
Entering a scheduler message:
1) Use the FMS Knob to select the AUX - Utility Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the first empty scheduler message naming field.
4) Use the FMS Knob to enter the message text to be displayed in the Alerts Window and press the ENT Key.
5) Press the ENT Key again or use the large FMS Knob to move the cursor to the field next to 'Type'.
6) Turn the small FMS Knob to select set the message alert type:
• Event—Message issued at the specified date/time
• One-time—Message issued when the message timer reaches zero (default setting)
• Periodic—Message issued each time the message timer reaches zero
7) Press the ENT Key again or use the large FMS Knob to move the cursor to the next field.
8) For periodic and one-time message, use the FMS Knob to enter the timer value (HHH:MM:SS) from which to
countdown and press the ENT Key.
1-38 Garmin G1000 Pilot's Guide for the Diamond DA40/40F 190-00592-02 Rev. A