Garmin G1000 Pilot's Manual page 178

GPS NAVIGATION
Viewing information about an airport:
1) Select the NRST Softkey to display a list of the nearest airports.
2) Select the desired airport.
3) Press the ENT Key.
4) The airport information is displayed with 'BACK' highlighted at the bottom of the window (Figure 5-48).
5) When finished viewing the airport information, press the ENT Key to return to the nearest airports list.
Activating a direct-to:
1) From the Nearest Airports Window, highlight the desired airport, then press the Direct-to Key.
2) Th e Direct-to Window appears. Press the ENT Key twice to activate.
Airport Identifier
Facility Name
Flight Plan List
Bearing to
Direct-to
Waypoint
Course Field
Selecting a COM frequency:
From the Nearest Airports Window, highlight the desired frequency, then press the ENT Key. The frequency is placed
in the standby COM frequency field in the COM Tuning Box.
COM Frequency
5-56
Airport Symbol
Figure 5-48 Airport Information Window
Figure 5-49 COM Frequency
Garmin G1000 Pilot's Guide for the Diamond DA40/40F
City, State
NRST Airport List
Distance to
Direct-to
Waypoint
190-00592-02 Rev. A