Replacing Existing Scenes (Av Insert) - Canon MVX100 Instruction Manual

Replacing Existing Scenes (AV Insert)

You can insert and replace images/audio on the tape of the camcorder with
E
images/audio from other video devices connected via AV terminal or DV terminal.
Playback tape
Tape in the
camcorder
before inserting
Tape in the
camcorder after
inserting
❍ You cannot insert from a TV program when the synchronized signals are
distorted.
Camcorder:
❍ Use only tapes recorded in SP mode.
❍ AV insert will stop if the camcorder detects a blank section or a section not
recorded in SP mode on the tape.
Connected device:
❍ Use only tapes without blank sections.
❍ AV insert may not work correctly if the tape has a blank section or changes in
the recording mode.
❍ AV insert cannot be performed when the quality of the recording is poor, or
during special playback such as fast forward, rewind, playback pause, slow
playback etc.
94
Scene to be inserted
Insert start
Inserted scene
Insert end