Recording Over Existing Scenes (Av Insert Editing) - Canon XL 1s Instruction Manual

Recording Over Existing Scenes (AV Insert Editing)

You can insert new scenes from your VCR or other camcorder onto your pre-recorded tape using the
E
XL1S's analog line-in or DV in terminals. Original video and audio will be replaced with the new video and
audio.
• When you make AV insert editing using the DV in terminal, you cannot insert new scenes from a tape
recorded in ´SP or ´LP modes.
The playback tape
Before inserting
The tape in the
camera
After inserting
The tape in the
camera
The video and audio of the new scene replace that of the old.
90
Scene to be inserted
Insert start point
STV-150 Stereo Video Cable
L
R
V
Signal flow
S
S-150 S-video Cable
Signal flow
Insert end point
L
AUDIO
R
VIDEO
S-VIDEO