Bartington Grad-13 Series Operation Manual page 32

BARTINGTON INSTRUMENTS
Ethernet Connection: This should be chosen if connecting via Ethernet. In this case the IP
address of the multiplexing box, and the Port for each Grad-13 connection, will be labelled on the
box.
Once the connection settings have been input, clicking 'Test' will attempt to connect to the Grad-
13 and inform you whether it has been successful. Click 'Save' to save the settings.
Once all Grad-13s have been connected, close the connection window and return to the grid
window. It should now appear as in figure 30 with the connected Grad-13s listed in the top left of
the graph.
Figure 30: Connection Established
DCN1040 Page 32 of 39 OM3100/2