Overview - Stanley M200 Setup & User Manual

Overview

Overview
The M200 Fall Management System consists of pressure-sensitive
Sensormat pads which detect the presence of a patient/resident, and a
monitor which provides staff with alarm information.
The monitor provides Pad Exit alarms and Confirmation tones.
If the patient/resident exits the bed or chair pad for longer than a
pre-selected number of seconds (0, 1 or 2), the monitor issues visual
and auditory alarms to alert staff that the patient/resident may need
immediate assistance. For the floor pad, the alarm is sounded when
pressure is added to the pad.
If a technical problem prevents the pad from monitoring (e.g., pad or
Nurse Call cable disconnect, low battery condition, etc.), the monitor
issues visual and Confirmation tones to notify staff.
If a Nurse Call system is connected, alarms can be sent to the Nurse Call
station. The staff member, having been alerted that a patient/resident
is exiting the bed or chair, must provide immediate assistance.
All audible alarms can be cancelled by pressing the Reset Button on the
front of the monitor.
2 M200 Fall Monitor – Setup & User Guide