Control Settings - Stanley M200 Setup & User Manual

Hardware Features

Control Settings

A
A. Use these control settings to adjust the audible Alarm Volume,
Tone, and LED Illumination Intensity. For a description of these
switches, see "Monitor Setup" on page 12.
B. The Playback and Record buttons, Recording red LED and the
Microphone are used to record custom audible/voice messages up
to a maximum of 15 seconds, after which a Positive Confirmation
Tone sounds. For instructions on recording a custom message for
an Exit Alarm, see "Recording Custom Pad Alarms" on page 14.
C. The DIP Switches are used to configure features for the M200
monitor. See "DIP Switch Settings" on page 15 for a description
of the DIP Switch settings.
8 M200 Fall Monitor – Setup & User Guide
B
C