Si041256
7. Fan Guards / Electrical Box
Warning
Step
1. Remove the fan guards.
Unfasten the 2 hooks
1
and remove the fan
guard.
2. Remove the electrical
box.
Remove the screw and
1
remove the drip proof
plate.
Remove the screw and
2
release the earth wire.
Pull out the indoor heat
exchanger thermistor.
Removal Procedure
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Procedure
Fan guard
Drip proof plate
Earth wire
Indoor heat exchanger thermistor
Fan Guards / Electrical Box
Points
Use a sharp tool such as an
awl to unfasten the lower
hooks.
(R12110)
(R15283)
(R12112)
11