Setting Of Dip Switches - Mitsubishi Electric CP9600DW Operation Manual

CONNECTIONS
2 2 2 2 2 SETTING DIP SWITCHES
All the switches are set to OFF at the time of shipment from the factory.
Turn off the power before changing the DIP switch settings.
Switch No. Setting Function
1 OFF Auto feed & cut mode
When the door is closed after the print paper is installed with this unit powered on,
this unit automatically carries out paper feed & cut operation.
ON Manual feed & cut mode
2 OFF Set this switch to OFF.
ON
3 OFF Set this switch to OFF.
ON
4 OFF Set this switch to OFF.
ON
5 OFF Set this switch to OFF.
ON
6 OFF Set this switch to OFF.
ON
7 OFF Set this switch to OFF.
ON
8 OFF Set this switch to OFF.
ON

SETTING OF DIP SWITCHES

10