Printing Pages On The Printer; Printing A Test Page - Digital Equipment Colorwriter LSR 2000+ Getting Started

3

3-12 Printing pages on the printer

Printing pages on the printer
A start page is printed automatically when you power on the printer unless you
disable the printing of a start page in System Setup on the printer control panel.
(See page 4-5 for details.) There are a number of different pages you can print
from the Colorwriter without sending a file from your computer. This section and
the next contain instructions for printing the following pages from the printer
control panel:
• Test page
• Job log
• Configuration page
• Help map
• Color pages
• Demo page 1
• Demo page 2

Printing a test page

Printing a test page enables you to confirm that the Colorwriter is properly
installed and to view color and grayscale samples to troubleshoot any problems. It
takes approximately 5 minutes to power up the printer and print a test page.
If you have trouble printing a test page, see Appendix D of the User Guide.
N :
OTE
T :
O PRINT A TEST PAGE
1. Turn on the printer and allow it to warm up.
Messages will appear on the control panel display window as the Colorwriter runs
through its power-up tests (see page 3-5 for a listing of power-up test messages).
READY
2. At the
3. Press the up or down button until you see
4. Press the Enter button.
The Colorwriter prints a test page.
screen press the Menu button on the printer control panel once.
TEST PAGE in the window.