Table of Contents
Advertisement
xv Important safety information
Air ventilation slots
(back)
Inhalation slot
(right side)
Unpacking and setting up the Colorwriter
•
Before connecting the printer to a power source, check the voltage rating label
on the back of the printer to ensure that the printer voltage matches that of the
power source. If the voltage label is missing, contact the nearest authorized
dealer or your place of purchase.
•
Avoid using an extension cord. If it is unavoidable, be sure to take the following
precautions. Failure to do this may lead to overheating, fire, or cause flickering
due to a drop in voltage.
•
Be sure not to exceed the allowed rating current of the extension cord.
Make sure that the total ampere rating of the products plugged into the
extension cord does not exceed the extension cord ampere rating.
•
Use a short extension cord. Do not connect several extension cords
together.
•
When connecting cables or disconnecting cables from the printer, make sure
that the power switch is in the off position.
•
Be sure to turn off the power before unplugging or plugging in the printer
power cord or interface cable.
Operating the Colorwriter
•
Slots and openings in the cabinet are provided for ventilation. To ensure reliable
operation of the printer and protect it from overheating, these openings should
never be blocked or covered.
Advertisement
Table of Contents
