Mitsubishi Electric MELSERVO-J2S-S061 Specifications And Instruction Manual page 39

Class No. Symbol
40 OVA For manufacturing setting
41
42 *ZPS Zeroing position data
Used to set the current position on completion of zeroing.
43 DCT Moving distance after proximity dog
Used to set the moving distance after proximity dog in count type zeroing.
44 ZTM Stopper type zeroing stopper time
In stopper type zeroing, used to set the time from when the machine part
is pressed against the stopper and the torque limit set in parameter
No.45(ZTT) is reached to when the home position is set.
45 ZTT Stopper type zeroing torque limit
Used to set the torque limit value relative to the max. torque in [%] in
stopper type zeroing.
46 LMP Software limit
47 Used to set the address increment side software stroke limit. The software
limit is made invalid if this value is the same as in "software limit
Set the same sign to parameters No.46 and 47. Setting of different signs will
result in a parameter error.
48 LMN Software limit
49 Used to set the address decrement side software stroke limit. The software
limit is made invalid if this value is the same as in "software limit ".
Set the same sign to parameters No.48 and 49. Setting of different signs will
result in a parameter error.
50 LPP Position range output address
51 Used to set the address increment side position range output address. Set the
same sign to parameters No.50 and 51. Setting of different signs will result in
a parameter error.
Name and Function
Set address:
Lower 3
Upper 3
digits
digits
Parameter No. 47
Parameter No. 46
Set address:
Lower 3
Upper 3
digits
digits
Parameter No. 49
Parameter No. 48
Set address:
Upper 3
Lower 3
digits
digits
Parameter No. 51
Parameter No. 50
38
Initial Value Unit
0
0
0 10
S
m
TM
1000 10
S
m
TM
100 ms
15 %
0 10
ST
m
M
".
0 10
ST
m
M
0 10
ST
m
M
BCN-B11127-479*
Setting Range
−32768
to
32767
0 to 65535
5 to 1000
1 to 100
999999
to
999999
999999
to
999999
999999
to
999999