Phase; Default Settings; Image Position - Elo TouchSystems ETL121K/P-6PWA-1 User Manual

Chapter 3 : Operation

Phase

The phase function is similar to the tracking control on a VCR. If your
VCR displays a jumpy or jittery picture, the tracking control allows you
to adjust the picture. The phase function allows you to optimize the
video timing and thus minimize jitter in the displayed video image.
Phase is factory set and seldom requires adjustment.
To adjust the phase:
1. Highlight the Phase menu option and press the SEL button. A
2. By using the UP and DN buttons adjust the phase.
3. When you have the phase at the desired level, press the SEL
4. To exit the menu, highlight the Exit menu option and press the

Default Settings

The default settings function allows you to restore factory default set-
tings stored in the touchmonitor's memory. These defaults cannot be
overwritten.
To restore the default settings:
1. Highlight the Default Settings menu option and press the SEL
2. Highlight the Exit menu option to return to the main window.

Image Position

The image position menu options allow you to center the active video
area.
Elo LCD Touchmonitor User Guide - 20
Phase gauge will display. The gauge will indicate a numeric
value which will change as you increase or decrease the con-
trast.
button.
SEL button.
button. All settings will be restored to their defaults.