Related Manuals for Elo TouchSystems ET2270L
Summary of Contents for Elo TouchSystems ET2270L
- Page 1 User Manual Elo Touch Solutions ET2270L, ET2470L Touch monitors USER MANUAL: <70 Series Monitor> UM600633 Rev A...
- Page 2 Copyright reserved © 2022 Elo Touch Solutions, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo Touch Solutions, Inc.
-
Page 3: Table Of Contents
Table of Contents Section 1: Introduction Section 2: Installation Section 3: Mounting Section 4: Operations Section 5: Technical Support Section 6: Safety and Maintenance Section 7: Regulatory Information Section 8: Warranty Information User Manual <70 Series Monitor> UM600634 Rev A User Manual<70 Series Monitor>... -
Page 4: Section 1: Introduction
Section 1: Introduction Product Description Your new touchscreen display combines Elo’s latest developments in touch technology and display design with the reliability for use in high-traffic environment. This touchscreen incorporates a 24-bit color, active matrix thin-film-transistor LCD panel to provide high quality display performance. The 70 Series offers sizes that range from 21.5’’... -
Page 5: Section 2: Installation
Section 2: Installation Unpacking the Touch Monitor Open the carton and verify that the following items are present: • Touch Monitor • Quick installation guide • HDMI cable • USB touch cable • Europe power cord • North American power cord •... - Page 6 Connector panel AC power input HDMI signal input Audio input or output USB-A interface DP signal input VGA signal input USB-B interface Cable tie hole Note: the cable tie hole is the position through which the tie wrap passes to bind the cable. It just needs to pass the tie warp through the hole and bind the cable to fix the cable connection.
- Page 7 Installing the Touch Technology Software Drivers No additional drivers are required for your projected-capacitive touch monitor with Windows 7 or 10 operating systems, as it will use the Windows HID drivers. If the monitor is used with the Windows XP operating system, follow the steps below to install the Windows XP touch driver.
-
Page 8: Section 3: Mounting
Section 3: Mounting Kickstand The Kickstand angle is manually adjustable in a range of “20° to pushing the machine or pull/push the kickstand by hand. 70°” by Minimum angle 20° Maximum angle 70° Note: Once the kickstand leaves the table, the open angle will automatically rebound to the minimum angle. Close the kickstand to prevent damage during moving the touch monitor. - Page 9 Rear VESA Mount A 4-hole 100x100mm mounting interface for M4 screws is provided on the back of the monitor. Peel off the cover mylar, then use a cross screwdriver to remove the screws so as to access the mounting interface. The interface is compatible with the stand of VESA MIS-D, 100, C defined by VESA FDMI.
-
Page 10: Section 4: Operations
Section 4: Operations Power supply To power on or off the touch monitor, press the power button. The power status LED on the back of the touch monitor functions as follows: Touch monitor Status LED Status Sleep Pulsing Power-on (green) The system consums minimum power when in Sleep or Off modes. - Page 11 Projected Capacitive Touch Technology When connected to Windows 7 or 10 computers, the touch monitor can detect 10 simultaneous touches. When connected to Windows XP computers, the touch monitor detects only single touches. No additional drivers are required for this technology to work with Windows 7 or 10, as it uses Windows HID drivers. Refer to Section 2, “Installing the Touch Technology Software Drivers,”...
- Page 12 Gesture support The TouchPro PCAP technology realizes multiple gestures which support single and multi-touch control. For the description of various gestures supported in Windows 7, 10 and updated operating versions, http://msdn.microsoft.com/en- please refer to Microsoft website: us/library/dd940543 Video A display’s native resolution is its width and height measured in pixels. Generally, for best performance, an image displayed on this monitor will look best when your computer’s output resolution matches this monitor’s native resolution, which is 1920x1080.
- Page 13 The OSD menu of 70 series supports the touch-control interaction.Touching the OSD menu can adjust the monitor parameters. Press the menu button to display the OSD main menu on the screen. Touch the icon on the OSD main menu to collapse the corresponding sub menu.
- Page 14 Color Setting Select the color temperature. The avaliable colors are 9300K, 7500K, 6500K, 5500K, color Enhance and User.If Color “User” is selected, the user can respectively modify the gains of red, green and blue (the range is 0 to 100) to change the color temperature.Default: User,the values of red, green and blue are all set to 100.
- Page 15 Simplified Chinese, Traditional Chinese and Japanese. Default: English Auto Adjust, Adjust automatically the system clock to the input analog VGA video signal, thus affecting the H. Position, V. Position, Clock and Phase menu options. Applicable to VGA input video only Miscellaneous Setting Switch the scaling method, Fill Screen and Fill Aspect Ratio.
- Page 16 TUV Low Blue Light and Flicker-free Certification The ET2270L/ET2470L have passed the TUV Rhine Low Blue Light and Flicker-free Certification and can lower down the damage posed by the monitor on human eyes. For the details, please refer to the follows.
- Page 17 Flicker Free TÜV Rheinland has tested this product to ascertain whether the display produces visibly and invisible flicker for the human eye and therefore strains the eye of the user. The keyword "Flicker Free" confirms that the device has no visible and invisible flicker defined in this standard within the range of 0 - 3000 Hz under various brightness settings.
-
Page 18: Section 5: Technical Support
Section 5: Technical Support If any problem occurs when you use the machine, please refer to the following suggestions. If the problem continues, please contact your local dealer or the Elo Touch Solutions Customer Service. The last page on the manual provides the global technical support phone numbers. - Page 19 Technical Assistance Technical Specifications Technical support www.elotouch.com/products Please visit https://www.elotouch.com/support Please visit To obtain the technical specification of the device Obtain the technical support Refer to the last page on the manual for worldwide technical support phone numbers. User Manual<70 Series Monitor> UM600633 Rev A...
-
Page 20: Section 6: Safety And Maintenance
Section 6: Safety and Maintenance Safety • To decrease the electric shock risk, please make sure to follow all the safety precautions and must not disassemble the machine without permission. The touch monitors are not user-serviceable. • The machine is equipped with three grounding power cords. The power supply plug can only be inserted into a grounded socket. Never attempt to insert the power supply plug into other socket or modify it. -
Page 21: Section 7: Regulatory Information
Section 7: Regulatory Information Electrical Safety Information The requirements on voltage, frequency and current marked on the manufacturer label must be met. If a non-specified power supply is used, it may result in abnormal operations, damaged device or fire. The device contains no component that can be repaired by the users themselves. The dangerous voltage generated by the device may pose safety hazards. - Page 22 Radiation and anti-interference information Notification for US users: The device has passed the tests and complies with the limitations on Class B digital equipment in Part 15 of FCC standard. These limitations can provide reasonable prevention on harmful interferences in household appliances. The device may produce, use and radiate radio waves.
- Page 23 General information for all users: The device will produce, use and radiate radio waves. If not installed and used per the manual, the machine may produce interference on radio and TV communication. Nevertheless, due to different scene situations, it cannot be guaranteed that it will produce no interference during a special installation course.
- Page 24 5 October 2022 FCC Declaration of Conformity Per FCC 47 CFR FCC Part15 subpart B Section 2.1077(a) In accordance with FCC Rules and Regulations Model Number: ET2470L, ET2270L Equipment Category: Information Technology and Telecommunications Equipment Equipment Class: Commercial and Light Industrial...
- Page 25 Agency Certifications The monitor has obtained the following certifications and marks: • CUL, IC (Canada) • CCC (China) • CE (Europe) • UKCA (British) • KCC (Korea) • BSMI (Taiwan, China) • FCC, UL (USA) • VCCI, PSE (Japan) • CB (International) •...
- Page 26 China RoHS certification According to Chinese Law (RoHS), the section will list the names and contents of toxic or hazardous materials possibly contained in the product. Part name Toxic or hazardous substance and elements Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent Polybrominated Polybrominated...
- Page 27 Explanation of mark According to the requirements of SJ/T11364-2006, an electronic information product shall be marked with the following pollution control marks. The product will pose no impact on the environment within 10 years. Under the following normal working conditions, the product will not be subject to leakage or change.
- Page 28 Monitor specification Working conditions Temperature 0~40°C Humidity 20%-80% (no condensation). Altitude 0-3,048m Storage conditions Temperature -20~60°C Humidity 10%-95% (no condensation). Altitude 0-12,192m User Manual<70 Series Monitor> UM600633 Rev A...
-
Page 29: Section 8: Warranty Information
Section 8: Warranty Information Unless otherwise specified in the manual or in the order confirmation letter delivered to the buyer, the seller guarantees to the buyer that the product has no materials or process defects. The warranty period of the touch monitor is 3 years. The seller makes no any guarantee on the standard service life of any component. - Page 30 the product using some other product or component manufactured or provided by the buyer as part of the product concerned) or incurred due to the buyer’s product, the buyer should bear all the liabilities. The buyer should bear the responsibilities for any and all the representations and warranties related to the product manufactured by itself or manufactured under license by itself.
- Page 31 Remark User Manual<70 Series Monitor> UM600633 Rev A...
- Page 32 Remark User Manual<70 Series Monitor> UM600633 Rev A...
- Page 33 Visit our website for the latest • Product information • Press Releases Specifications • • Software Drivers Upcoming events • Touchmonitor Newsletter • To find out more about our extensive range of Elo touch solutions, go to www.elotouch.com, or call the office nearest you. Americas Europe (EMEA) Asia-Pacific...